Browse all practice questions for the Ship Structure Test 4 Practice. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Ship Structure Test 4 Practice course image
All questions

These questions are part of the practice quiz. Start practicing

  • What is the defining structural feature of a graving dock?
  • What term is used for shell plating with curvature in two directions that requires heating and hammering to shape?
  • Why must loading sequence by hatch be carefully planned when loading taconite?
  • Which statement about solid floors is correct?
  • What structural role do deck beams perform in addition to supporting vertical deck loads?
  • With no propeller slip, what is the distance a ship moves forward during one revolution of its propeller called?
  • What is the term for the transverse curvature of a ship’s deck?
  • In a longitudinally framed ship, which athwartship members support and hold the longitudinal frames in place?
  • Which framing arrangement is generally preferred for breakbulk cargo vessels?
  • A vessel moves horizontally forward and backward without rotating. What is this motion called?
  • Which term names the immersed body of a vessel located forward of its parallel mid-body?
  • A vessel’s midship draft is greater than the average of its forward and after drafts. Which condition does this indicate?
  • A deck fitting used to secure a line has one body and two protruding horns. What is it called?
  • Which member is specifically oriented across the ship rather than fore and aft?
  • Which group consists entirely of spaces identified as exempt when measuring gross tonnage?
  • What are reinforcing frames attached to a vessel’s bulkhead called?
  • Why are transverse framing systems commonly used on breakbulk vessels?
  • What are the fittings used to secure a watertight door called?
  • Which deck fitting has a single body with two projecting horns and is used to secure a line or wire rope?
  • Which part of a double bottom provides a second skin for the vessel?
  • When a vessel's weight is concentrated amidships, what stress is imposed on its bottom?
  • What is the primary function of a bilge well?
  • Which structural member is a deep transverse frame used to strengthen a ship’s framing?
  • What is a large shore-side basin closed by a caisson and used to dry-dock ships called?
  • Which row of hull plating lies nearest the keel?
  • Freeboard is the vertical distance between which two points?
  • When a ship's closely spaced continuous strength members are arranged transversely, what is the vessel's framing type?
  • Where should a shipbuilder expect closer frame spacing than in much of the vessel’s length?
  • What are the projecting lugs of a rudderpost that support the rudder called?
  • Which is a function of a deck beam?
  • A substantial member runs fore and aft within the bottom structure but is not itself a keel plate. What is it called?
  • Which feature may be cut into solid floors?
  • Which vessel characteristic is represented by gross tonnage?
  • A vessel’s gross tonnage is calculated as 8,400 under a traditional measurement method. What qualifying volume, in cubic feet, does this represent?
  • When calculating gross tonnage by the traditional cubic-foot method, what is done before dividing the volume by 100?
  • Which term identifies the fore-and-aft curvature of a vessel’s deck?
  • What are strakes called when they are discontinued toward the bow and stern to reduce plating at the ends?
  • Which framing arrangement is characterized by closely spaced, continuous longitudinal strength members?
  • Which term expresses, in tons, how much cargo a vessel can carry?
  • Which part of a vessel is its quarter?
  • A ship dimension measured from the inner face of the shell or deck plating is described as what?
  • Which keel component is the vertical plate located along the ship’s centerline?
  • What cargo-stowage concern can make deep web frames undesirable on a breakbulk vessel?
  • What term describes the total weight of cargo, fuel, water, stores, passengers, crew, and their effects that a ship can carry?
  • Which shipboard feature is associated with drainage?
  • Which plating forms the outboard strake on each side of an inner bottom?
  • How is a cofferdam typically constructed?
  • Which statement is NOT an advantage of a double bottom?
  • What is the likely effect of increasing propeller speed on cavitation?
  • In what units is gross tonnage expressed?
  • What type of members provide athwartship support for longitudinal framing?
  • When a ship is sagging, which stress is generally present in its deck?
  • After water accumulates on deck, which feature allows it to drain through the bulwark overboard?
  • What is the immersed portion of a vessel forward of the parallel mid-body called?
  • Which space is not exempt when determining a vessel’s gross tonnage?
  • In a transversely framed vessel, what stress do deck beam brackets resist?
  • In a double-bottom structure, which members are fastened to both the tank top and bottom shell?
  • Which deck-beam function helps resist wrinkling of plates caused by twisting action on a vessel?
  • Where do signs of racking stress generally appear in a vessel's structure?
  • What is the curved transition between a ship’s bottom and side shell called?
  • Molded depth is measured from which part of the vessel’s structure?
  • What material is commonly used for merchant-ship propellers?
  • What is the name of the bottom strake of plating immediately next to the keel?
  • What is the primary purpose of a Kort nozzle fitted around a propeller?
  • How do the floors and longitudinals of a double bottom help the hull?
  • On a vessel's principal dimensions, which measurement does the beam represent?
  • What is the name for the dimensioning measurements of a ship's structural members?
  • Where should keel scantlings generally be greatest in a ship?
  • A vessel’s bottom rises from the keel toward the bilge. Which hull feature does this describe?
  • What effectiveness is assigned to a welded joint?
  • Which statement best describes the relationship between gross and net tonnage?
  • Which structural members help prevent hull floors from tripping or folding over?
  • What is a cofferdam in a ship’s structure?
  • For what purpose may the center of gravity of a loaded bulk cargo ship be raised using a double-bottom arrangement?
  • Which design feature is associated with reducing propeller-induced vibration?
  • What is the name for the vertical motion of a floating vessel?
  • When a vessel’s forward draft is 8 ft and after draft is 12 ft, which midship draft indicates a hogged condition?
  • What is the primary purpose of sheer in ship construction?
  • A ship is designed to remain afloat after any two compartments flood. Which damage condition is it designed to survive?
  • In a single-screw vessel, what is the extension of the after part of the keel upon which the sternpost rests?
  • What is the space between a ship’s bottom shell and its inner bottom called?
  • A vessel has continuous, closely spaced longitudinal strength members. How is it framed?
  • Which component is the vessel’s outer plating, rather than a reinforcing member attached to a bulkhead?
  • What temporary measure can help prevent a crack in deck plating from increasing in length?
  • What is a principal benefit of using a skewed propeller?
  • How does a deck beam help maintain the ship’s structure?
  • Which measurement describes the vertical distance from the deck line to the waterline?
  • Which pillar shape provides the greatest strength for the least weight?
  • What term describes the outward curvature of a hull above the waterline?
  • What is the term for a vessel's horizontal movement in the fore-and-aft direction?
  • A bulkhead requires additional structural reinforcement. Which type of member should be attached to it?
  • Which term describes the plating that forms the outside of a vessel?
  • In which regions is frame spacing typically reduced?
  • A hull curves outward above its waterline. What is this feature called?
  • Which item is not a plate or plate component of the keel?
  • Which process should be expected as the primary welding method in a shipyard?
  • Which structural member extends transversely across the bottom framing of a ship?
  • What is the space above a vessel's engine room called?
  • A ship needs to be placed in a drydock. Which pair correctly identifies the two common drydock types?
  • What is the keel under in a ship that is hogged?
  • When a ship is sagging, what type of stress acts on its keel?
  • In a double-bottom vessel, what is the shell plating below the tank top called?
  • In a ship’s hull, what is a seam?
  • What is a “dog” used for on a watertight door?
  • An inspection finds racking-related signs where structural frames meet the beams and floors. What type of stress is indicated?
  • A vessel’s frame spacing is being planned near the bow and stern. How should it compare with spacing over much of the vessel’s length?
  • Gross tonnage is an indication of a vessel’s:
  • Under the traditional volume-based calculation, gross tonnage is obtained by dividing the qualifying ship volume in cubic feet by what number?
  • Which statement correctly describes Panama and Suez tonnages in relation to net tonnage?
  • From which reference is freeboard measured?
  • Which member is an upright structural support used beneath a deck?
  • What is the plating that forms the upper boundary of a double bottom called?
  • A deck beam can help prevent the ship’s sides from moving out of position by acting as what?
  • Which description best identifies a floor in ship construction?
  • What is the immersed body of a vessel aft of the parallel mid-body called?
  • A ship has a forward draft of 8 ft, an after draft of 12 ft, and a midship draft of 9 ft 6 in. What condition does this indicate?
  • A vessel rotates about its longitudinal axis. Which motion is it making?
  • In a double-bottom ship, what is the inner bottom commonly called?
  • Which welding process is used primarily in shipyards?
  • In ship construction, what does the term “strake” refer to?
  • Which statement correctly describes the margin plate?
  • What term describes the longitudinal curvature of a ship’s decks?
  • In ship construction, what does the term “longitudinal” describe?
  • How is net tonnage generally distinguished from gross tonnage?
  • What is the name of the strake immediately adjacent to the keel on each side?
  • A ship’s hull is sagging under longitudinal bending. Which description best fits the keel?
  • Which statement correctly distinguishes shell plating from bulkhead stiffeners?
  • Pitching is the angular motion of a vessel about which axis?
  • What is the formation of voids at propeller blade edges that can cause pitting, vibration, and reduced efficiency called?
  • A vessel's cargo-carrying capacity stated in tons is described by which term?
  • Why are a vessel’s keel scantlings greatest amidships?
  • Which change would generally make propeller cavitation more likely?
  • When planning cargo operations on a very large crude carrier, which structural limit requires particular attention?
  • What is the primary purpose of freeing ports in a vessel’s solid bulwarks?
  • Which effect is NOT a function of a deck beam?
  • When a ship is hogging, what type of stress acts on its keel?
  • What is the joint between two steel shell plates placed longitudinally side by side called?
  • Which listed space is exempt when measuring gross tonnage?
  • What does the term “scantlings” refer to in ship construction?
  • Which factor is the main reason hatch-by-hatch loading sequence matters for a dense bulk cargo such as taconite?
  • Which vessel dimension is called the beam?
  • What is the term for a vessel's horizontal movement to port or starboard?
  • A vessel’s vertical distance from the waterline to its highest point is its what?
  • A vessel has continuous, closely spaced transverse strength members. What framing arrangement does it have?
  • Which pair names the two common types of drydock?
  • How is shell plating with complex curvature shaped into its required form?
  • What is a chock used for when fitted in a bulwark?
  • Why do merchant ships generally have fewer compartments than naval vessels?
  • Another name for a ship’s garboard strake is which of the following?
  • For the tonnage tax described in traditional vessel measurement practice, which measure is used?
  • In ship construction, what does the term “limber” relate to?
  • Which term identifies the immersed part of a ship located aft of its parallel mid-body?
  • What is the bottom shell plating of a double-bottom vessel called?
  • What is the primary purpose of a flame screen on a tank vent?
  • Which statement correctly distinguishes the inner bottom from the double bottom?
  • For a breakbulk vessel, which framing system avoids the stowage interference associated with deep web frames?
  • What is the upward slope of a ship’s bottom from the keel toward the bilge called?
  • Two forces acting in opposite directions along parallel lines produce what type of stress?
  • Which drydock type is a floating structure that can be submerged to receive a ship and then raised?
  • Which measurement is the air draft of a ship?
  • Which statement about gross tonnage is correct?
  • A bulwark has openings intended to let water drain from the deck into the sea. What are these openings called?
  • A ship has a forward draft of 12 ft, an after draft of 10 ft, and a midship draft of 11 ft 6 in. What condition does this indicate?
  • A merchant vessel’s propeller is being selected for a typical installation. Which material is the most suitable choice from these options?
  • On a double-bottomed ship, what are floors?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy